Stainless steel flange tension sensor, used in harsh environmental conditions such as washing machines and pickling production lines
Due to various installation options such as flange mounted bearings, internal or external fixation, there is no problem installing in any position
Due to overload protection up to 20 times the rated measuring force, high operational safety is ensured
When measuring the direction horizontally, the weight of the roller has no effect on the measurement results
Due to the application of strain gauges on the plane, the measuring element has good temperature characteristics and high linearity
Due to the large spring constant of the material tension sensor, it is allowed to measure the high-speed operation of Kun
| Single-sided open hole | (mm) | Rated measuring force (kN) | |||
|---|---|---|---|---|---|
| PD 2317 | 17 | 0.1 | 0.2 | 0.5 | 1 |
| PD 2325 | 25 | 0.15 | 0.3 | 0.75 | 1.5 |
| PD 2335 | 35 | 0.3 | 0.6 | 1.5 | 3 |
| Flange type steel sensor PD23 | |
|---|---|
| Accuracy level | 0.5 |
| Rated characteristic value (sensitivity) | 1mV/V |
| Combining errors | <0.5% |
| Characteristic value tolerance | 0.2% |
| measuring principle | Strain gauge full bridge |
| The nominal resistance of the strain gauge bridge | 700 Ohm |
| Rated voltage of bridge power supply | 10V |
| Maximum allowable value | 14V |
| Mechanical stop | 1.8 to 2.4 x FN depending on the type |
| Work load | 1.8 to 2.4 x FN |
| Ultimate load | 20 x FN |
| Target measurement journey | 0.1 to 0.25 mm depending on the type |
| Rated temperature range | -10 to 60 ℃ |
| Working temperature range | -10 to 90 ℃ |
| temperature coefficient |
± 0.3%/10 K (characteristic value) ± 0.3%/10K (zero signal) |
| Protection level | IP64 |
| Maximum allowable axial shear force | 1 × FN |
| weight |
2.3kg(D3=17mm),3.6kg (D3=25mm),8.5kg(D3=35 mm) |
Copyright © Shenzhen DOT LINK Sensing Technology Co., Ltd 粤ICP备2023125867号