Combined with the use of standard guide rollers, it can be installed on almost all commonly used continuous seat bearings
Due to overload protection up to 10 times the rated measuring force, high operational safety is ensured
A large measurement range with a resolution of 1:25
Double curved beam with charged resistance strain gauges in the full bridge circuit
Due to the easy accessibility of the continuous seat bearings, the replacement of the guide rollers is extremely simple
Can be installed on both the machine wall side and the machine wall
| model | structure size L × B × H (mm) |
Through-hole | Used for assembly Hole spacing (mm) |
Rated measuring force FN (Kn) | ||
|---|---|---|---|---|---|---|
| PD 5010 | one hundred and thirty-four × forty-eight × seventy-eight | φ seven | one hundred and eighteen × twenty-eight | 0.08 | 0.2 | 0.4 |
| PD 5020 | one hundred and fifty × sixty-eight × seventy-eight | φ eight point seven | one hundred and thirty-five × fifty-one | 0.5 | 1.0 | 2.0 |
| Flange tension sensor PD23 | |
|---|---|
| Accuracy level | 0.5 |
| Rated characteristic value (sensitivity) | 2mV/V |
| Combining errors | ± 0.5% |
| Characteristic value tolerance | <± 0.2% |
| measuring principle | Strain gauge full bridge |
| Nominal resistance of strain gauge bridge | 700 Ohm |
| Rated voltage of bridge power supply | 10V |
| Maximum allowable value | 14V |
| Mechanical stop | one point two × FN depends on type |
| Workload | one point two × FN |
| Extreme load | ten × FN |
| Target measurement stroke | 0.2 to 0.3 mm depending on type |
| Rated temperature range | -10 to 60 ℃ |
| Working temperature range | -10 to 90 ℃ |
| temperature coefficient | ± 0.3%/10 K (characteristic value) ± 0.3%/10 K (zero signal) |
| Protection level | IP54 |
| Maximum allowable axial shear force | one × FN |
| weight | 1.5kg |
Copyright © Shenzhen DOT LINK Sensing Technology Co., Ltd 粤ICP备2023125867号